Replacing a Glass Door Panel on the Exterior of a House

Replacing a Glass Door Panel on the Exterior of a House

Exterior doors come in numerous shapes, sizes, colors and textures. Some accompany glass panels. Glass panel doors are likewise shifted. The glass panels come clear, textured, designed and murky. Glass is exceptionally delicate and can soften particularly up an exterior door. A doors gets pummeled and rocks get tossed. Assuming that a glass panel in a door breaks, it will be replaced. City codes usually request installing treated glass which destroys in a huge number of minimal pieces instead of normal glass that descends in extensive lances.

  1. Measure the glass panel requiring replacement and request the new bit of glass. Glass might be requested from any glass company.
  2. Remove the silicon-based sealant from around the old glass panel, in your exterior house door, using a glazing knife.
  3. Remove the glazing dab or caulking from the glass panel border and remove the old glass panel from the door.
  4. Clean up all the old sealant and caulking with a knife or spatula from the door’s glass pit.
  5. Apply another silicone-based sealant, bought at any fittings or glass store, around the inside of the pit and install the new bit of glass. The sealant gives a dampness obstruction.
  6. Place a glass stop around the glass border. Measure and slice quarter adjust wood to fit along each of the four sides of the glass panel. Precisely mallet the wood trim in place using little brad nails.

Related Post